HOW TO INSTALL YOUR 2COOLPC AND 2COOLPC-PLUS PRODUCTS
 |
We have an installation video if you
prefer. This requires an MPG player. |
|
 |
||
| Turn your computer off and remove the cover as show on right. |  |
|
| Place unit in your computer so it
is pushed toward the back of your computer as far as it will go as show on
right.
Find a Molex power connector coming from your computers power supply. If one is not available you can unplug your CD Rom or Hard Drive and plug the 2coolpc cooling system in and then plug your component back in with the Y adapter that is attached to the 2coolpc. If you are not familiar with what a Molex connector is here is a picture:
|
 |
|
| Make sure the 2coolpc cooling
system is placed toward that back of the computer system.
We also provide 3 Dime tabs of Velcro with your 2coolpc cooling system. If you move your computer around you may want to use these. To see how these are placed onto the 2coolpc Click Here |
 |
|
| Once you
have done the following steps, turn on your computer without putting the cover back on. This insures that the 2coolpc
is operating with no problems and that no
wires are in the way of the fan. After you have verified that the 2coolpc cooling system is working, place
your computer cover back on and you're done.
|
|
2COOLPC AND 2COOLPC-PLUS INSTALLATION
For Further Help Contact TechSupport@2coolpc.com
